led bulb kit suitable for Toyota Yaris 4Dr Sedan 2007-2019

CSP LED Headlights: Imported CSP chips, high optical density and low heat resistance, improve the light efficiency up to 95%. Bright pure white lighting.

--Fan Cooling: （9003/H4）Built-in cooling fans, intelligent and efficient cooling system, rapid heat dissipation

--Rainproof: Works better in rainy days and even in harsh conditions.

Characteristics:

Available Single Beam Bulb Size: 9003/H4; 9005/9006/9145 (Replaces High Beam & Low Beam or Fog Lights)

Power: 160W/set ​​(80W/bulb)

LED Quantity: 6pcs/12pcs CSP LED chips(each bulb)

Luminous flux: about 8000lm/set (4000lm/bulb)

Operating voltage: DC 9-32V (suitable for 12V/24V vehicles)

Color temperature: cold white 6000K

Material: 6063 aircraft grade aluminum profile

Operating temperature: -40-80 degrees Celsius

Waterproof Grade: IP67 Water and dust proof

Lifespan: More than 30,000 hours

Warranty: 5 years

Package includes:

4pcs LED Headlight Bulbs

New and old packages will be shipped randomly

Q1. Will these LED bulbs fit my car?

The "Compatibility" table on Ebay may not be 100% accurate or up to date.

If you don't know the part number of your existing bulb, please follow the steps below to match the correct LED bulbs before purchasing to avoid mistakes.

(1)Go to website "https://www.rockauto.com/", find the stock bulb part number on your vehicle.

(2) Check your vehicle manual or remove the existing bulb from your vehicle, verify the bulb part number, match the part number in our list.

(3) Contact us via eBay message to tell us your vehicle information (make, model and year), then we will help you match the right bulb.

Q2: How to install these LED bulbs and get a good pattern?

A: It should be installed vertically and the diodes are at the 9 and 3 o'clock positions.

(about 9007/H4/H13 hi-lo led bulbs, high beam is on low, low beam is on high)

The headlight reflector of each car is different, so for some vehicles, the 9004/9007/H4/H13 LED bulbs will need to adjust the angle to get the best pattern. First let the headlight shine towards the wall, remove the screws from the bracket and install the LED bulbs into the headlight housing, and slowly rotate the bulb to find the best configuration, then re-tighten the screws of the LED bulb bracket to secure it. Sometimes, after finding the best angle, you may need to manually drill a new hole to fix it.

Q3: After installation, why none of the side LED bulbs light up or on? or the LED bulbs on both sides are flashing? or do you have an error code on the car computer?

A: (1) First, polarity issue. Unlike halogen bulbs, LEDs are sensitive to polarity. Different car manufacturers have different polarity settings, if your LED bulbs do not light up or not turn on, please check the polarity mismatch, unplug the bulb and flip the socket to reverse the polarity for installation.

(2) Second compatible problem (voltage problem). The vehicle's computer system is sensitive to the LED headlight bulb (the power of LED headlight bulb is lower than halogen). Therefore, it may cause compatible problem (flickering, error code, radio interference, interference with headlight fog lights, interference with high and low beams, etc.), after replacing the LED headlight on some vehicles, e.g. Mercedes, Ford, Volvo, Jeep Dodge and Ram etc., then need to add resistors/decoders to solve these compatible problems.